In a house without a cellar, you should especially pay attention and take care to block the access of cold to the house from the ground and the leakage of heat from the building to the ground, as well as the penetration of moisture from the ground into the house. It is important to secure the premises by properly insulating the foundation and floor.
Water from the ground penetrates as a result of the so-called capillary attraction - the pores of uninsulated concrete act like tiny pipes, "sucking" moisture from the surrounding earth. In buildings without a foundation on the floor and on the walls of the foundation of the above-ground barrier, moisture-proof insulation with PVC foil or adhesive tar is sufficient. It will also be necessary to insulate the floor on the ground. Experts, however, were divided in their views on the expediency of performing ground foundations of vertical foundation walls.
In 2018, an extended visiting meeting of the State Duma Committee on Natural Resources, Property and Land Relations was held. A bill was discussed that proposes to amend the Land Code. The event was held on the basis of the State University for Land Management.
The main topic of the meeting was the issue of allowing the construction of a residential building on a land plot provided to a peasant (farm) economy. At the same time, in order to prevent abuse of the right and exclude the development of agricultural land, it is proposed to prohibit the formation of a land plot under such a house and its resale.
Free privatization of housing (apartments) until March 1, 2018 is not a rumor, but a reality. A few years ago, the authorities said that they would leave a person only one year for the privatization of housing, but at the end of it they again extended the period, and 2018 most likely will not be an exception.
The use of cadastral value in determining the property tax of individuals and enterprises may be excluded
Thus, it is proposed to amend Chapter 30 “Organizational Property Tax” and Chapter 32 “Individual Property Tax” of the Tax Code to provide for the exclusion of determining tax bases for corporate property tax and individual property tax based on the cadastral value of real estate objects. It is planned to determine the tax bases for the said property: for organizations - based on the average annual value of the property, for individuals - based on the inventory value.
Related amendments are provided for in the Federal Law of July 3, 2016 No. 237-FZ "On State Cadastral Valuation". They concern the exclusion of the possibility of determining the cadastral value for tax purposes.
The Ministry of Construction of Russia submitted a draft of the relevant government decree for independent anti-corruption expertise and public discussion. The document is planned to supplement the Regulations on recognizing the premises as residential premises, residential premises unfit for habitation and an apartment building as emergency and subject to demolition or reconstruction (hereinafter referred to as the Regulations) with norms, respectively, on recognizing a garden house as a residential building and a residential building as a garden house. A clarification will appear in the Regulations that a garden house is understood as a building of seasonal use, designed to meet citizens' domestic and other needs related to their temporary stay in such a building. The concept of a garden house will be introduced into the current legislation, paragraph 3 of Art. 3 of the Federal Law of July 29, 2017 No. 217-FZ "On the conduct by citizens of gardening and horticulture for their own needs and on amendments to certain legislative acts of the Russian Federation" from January 1, 2019 - the date the said law enters into force.
The recognition of premises as suitable or unsuitable for habitation is carried out by the District Interdepartmental Commission for Consideration of the Issues of Recognizing Residential Premises as Suitable (Unsuitable) for Habitation. Then, on the basis of the decision of the Commission, the prefecture of the administrative district adopts a legal act on recognizing the residential premises as suitable (unsuitable) for living, indicating the further use of the premises. (Decree of the Government of Moscow N 1072-PP "On the procedure for recognizing residential premises as suitable (unsuitable) for living in the city of Moscow and making changes, recognizing legal acts (certain provisions of legal acts) of the city of Moscow as invalid")
The Department of State Registration of Rights and Issuance of Information of Rosreestr, together with the Federal State Budgetary Institution "FKP Rosreestr", analyzed decisions to suspend the implementation of state cadastral registration for the period from January to April 2017.
According to the identified data, the most common reason hindering the implementation of state cadastral registration is the poor-quality work of a cadastral engineer in terms of the implementation of legislation and requirements related to the preparation of documents necessary for state cadastral registration of capital construction objects located on the territory of more than one cadastral district.
In November, extracts from Rosreestr on DDU will be issued for 1 ruble
The press service of the department informed the ERZ portal about the planned timing of the adjustment of the order of the Ministry of Economic Development No. 968 of December 23, 2015. The ERZ portal has repeatedly covered the topic of simplifying electronic interaction between the state and business in accordance with Federal Law No. 218-FZ "On state registration of real estate". Recall that the law provides for the creation of the Unified State Register of Real Estate (EGRN), which should include information contained in the Unified State Register of Rights and the State Real Estate Cadastre. Using this service, you can currently receive various types of extracts from the USRN. The list of extracts from the USRN, which are provided using the information resource, is determined by the order of the Ministry of Economic Development dated December 23, 2015 No. 968. This list did not include an extract on registered contracts for participation in shared construction.
Vladimir Putin proposed expanding the Far Eastern Hectare program
We must not forget about the Far East - this is a state priority, the president recalled at a meeting of the State Council Presidium on Russky Island in Vladivostok. Vladimir Putin also called for allocating "Far Eastern hectares" to compatriots from abroad, and giving even more land to those who have already mastered their allotments.
Those wishing to take a “Far Eastern hectare” for free have become 120 million times more likely to have a choice.
There are more lands where one can now register a Far Eastern hectare. If earlier more than 75 percent of the plots were closed from the provision of "Far Eastern hectares", now their number for issuance to citizens has increased by more than 120 million hectares. This was stated in an interview with Rossiyskaya Gazeta by Yury Trutnev, Deputy Prime Minister of the Russian Federation - Plenipotentiary of the President of the Russian Federation in the Far Eastern Federal District.
Accounting: Benefits of Delegation
Small businesses regularly face challenges along the way. Finding clients, processing transactions, submitting reports to regulatory authorities, searching for investments, working with clients - these processes take a lot of time and effort. Accounting support http://rusbalans.ru/ for legal entities is an absolutely necessary service for those who value their time and are ready to delegate important processes to specialists.
Today, a number of regulatory authorities have established the acceptance of declarations in electronic form. FTS, PFR, Rosstat, FSS - just a small list where you can submit information. Submitted tax returns electronically
And what problems only do not have to solve computer programmers in their activities. Here is one of the puzzles. It seems like you just need to open the file and that's it ...
However, in practice, everything is not at all simple. Trying to open an understandable XML file, we get a blank page. We climb into the code - everything seems to be logical - a bunch of data in XML tags. We understand that the problem is that there are no design settings in the file itself. They must be loaded from an external resource... And the specified file also refers to a group of files with settings for each section of the document. As a result, all browsers refuse to load all these files, seeing this as a gross violation of the security policy.
And here the "dancing with a tambourine" begins: we turn off "protection from dangerous sites" in the browser settings; we start the browser with disabled security tools; looking for additional services; invent and write additional programs. The first time I encountered this problem, running the Firefox browser with the options to disable protection helped. As it turned out, this decision was enough for about a year. And suddenly this method stopped working. And on different computers and in different versions of browsers.
To solve this problem once and for all, I had to study this issue in more detail. It turns out that the solution to the problem is available on the Rosreestr website itself. And there is even an instruction there (only, at the time of writing this article, it was outdated - the design of the site has changed, and nothing can be done according to the pictures in this instruction).
I will no longer torment thoughts and memories.
Solution
1. Go to the "Checking an electronic document" page on the Rosreestr website.
2. There is a field on this page. This is the field for specifying your file to upload. We press the button "Overview…"(The name may be different in different browsers). Select the desired XML file on your computer.
3. Having specified the required file, at the bottom of the form, press the button "Check>>".
4. When the page refreshes, next to the field "Electronic document (xml-file)" information about the downloaded file will appear, and next to it it will be written "Show in human readable format". By clicking on this link, you will open a new window in which your file will be in an understandable form.
However, in practice, everything is not at all simple. Trying to open an understandable XML file, we get a blank page. We climb into the code - everything seems to be logical - a bunch of data in XML tags. We understand that the problem is that there are no design settings in the file itself. They must be loaded from an external resource... And the specified file also refers to a group of files with settings for each section of the document. As a result, all browsers refuse to load all these files, seeing this as a gross violation of the security policy.
And here the “dancing with a tambourine” begins: we turn off “protection from dangerous sites” in the browser settings; we start the browser with disabled security tools; looking for additional services; invent and write additional programs. The first time I encountered this problem, running the Firefox browser with the options to disable protection helped. As it turned out, this decision was enough for about a year. And suddenly this method stopped working. And on different computers and in different versions of browsers.
To solve this problem once and for all, I had to study this issue in more detail. It turns out that the solution to the problem is available on the Rosreestr website itself. And there is even an instruction there (only, at the time of writing this article, it was outdated - the design of the site has changed, and nothing can be done according to the pictures in this instruction).
I will no longer torment thoughts and memories.
Solution
1. Go to the page "Checking an electronic document" on the Rosreestr website.
2. On this page there is a field "Electronic document (xml-file)". This is the field for specifying your file to upload. Click the "Browse ..." button (in different browsers, the name may be different). Select the desired XML file on your computer.
3. Having specified the required file, at the bottom of the form, click the "Check>>" button.
4. When the page is refreshed, information about the uploaded file will appear next to the "Electronic document (xml-file)" field, and "Show in human-readable format" will be written next to it. By clicking on this link, you will open a new window in which your file will be in an understandable form.
Free legal advice:
More materials from this section
Comments
In this case, I would write to their technical support Rosreestr. Problems with acceptable upload sizes are due to the settings of the server or system processing documents - this is usually not difficult to fix. If a document of this size is the norm, then probably the service should take this into account and fix this limitation.
Haven't seen such a solution. Perhaps some organization could order something similar for its own needs, but this is just a third-party development.
Unfortunately, if errors occur on the Rosreestr website, I will not be able to change something. I will assume that there are special cases or errors in the processing of documents. In theory, the technical support of the service should monitor such things. I think it's worth notifying them, maybe they can quickly fix the problem.
On this file I need to adjust the settings
Free legal advice:
cryptcp.exe application from CryptoPro in order to
to get the correct one (from the point of view of the Rosreestr website)
an electronic signature for at least an XML file (for some reason, the service for early verification of an ES for .pdf or .zip files is not provided).
Finding an example of the “necessary” file turned out to be not so easy -
either the format is not supported, or the size does not fit into 5 megabytes.
Free legal advice:
Unfortunately, I don't have such a file. I dealt with this problem for a very long time, and since then I have not touched it.
How to read the cadastral extract received in electronic form?
It is very convenient to order cadastral information via the Internet on the Rosreestr website. But from July 1, 2013, cadastral information prepared in electronic form no longer contains a document in *pdf format. This is due to the fact that the new version of the automated information system of the state real estate cadastre (AIS GKN) does not provide for the generation of a PDF document. The current legislation also does not provide for attaching a document in *pdf format.
The cadastral registration authority sends cadastral extracts, cadastral passports and cadastral plans of the territory in the form of two files: *xml and *xml.sig (*xml file, signed by an electronic digital signature of a cadastral registration authority specialist). These files are not readable by regular programs on the computer. You cannot print a full statement or other document in these formats.
The question arises, how to read the cadastral information received in electronic form?
On the Rosreestr website, it is possible to generate a printed representation of a document containing cadastral information from *xml and *xml.sig files. The service is called " Checking the electronic document ". Using this service, you can print the ordered document in a normal, familiar form.
To do this, follow the link:
SERVICE VERIFICATION OF ELECTRONIC DOCUMENT.
Free legal advice:
Then click on the “Show in Human Readable Format” button. A document will open in the browser, which you can print or save to your computer.
You can use any browser, but Rosreestr advises using Internet Explorer. Drawings in the document may not be displayed, for this you should unblock it in the browser settings (if the page content is blocked).
READ FULL SERVICE INSTRUCTION VERIFICATION OF ELECTRONIC DOCUMENT…
Read other interesting articles:
How to choose a land plot? This difficult question arises before those people who prefer their own house with their own adjacent territory to an apartment.
November 19, 2014 the Rules for assigning, changing and canceling addresses were approved (Government Decree No. 1221 of 11/19/2014).
I congratulate all cadastral engineers on their professional holiday, the day of the cadastral engineer!
Free legal advice:
67 comments to “How to read a cadastral extract received in electronic form?”
Through the website of Rosreestr, it is not possible to convert an extract into a printed representation if the extract is large (more than 10 MB). On the other hand, some state authorities require a printed extract. It turns out a dead end. As usual with us - "everything for the people."
When opening on the website of the registry, they write "Show in human-readable format." and in what then issue?!
Rosreestr deliberately confused everything so that we would not climb into the private property of the authorities. If they wanted to fight corruption, they would have made the information from Rosreestr free and publicly available.
Thank you! I almost turned gray because of these idiotic freaks from the registry, who do not care about people's convenience.
Free legal advice:
Thank you again!
Thanks a lot. You don't even know how you got it
Thank you for help! Helped out a lot!
Thanks! Helped to open the extract file from Rosreestr. We suffered for a long time with formatting, but it turned out that everything is much simpler))).
I could not help unsubscribing, the problem arose with a large file, the registry cannot process it in any way, however - open Internet Explorer, then press F12, find the emulation mode, turn on Document Mode - 7, and open or drag your xml file into the window. I hope it helped.
Free legal advice:
Max, thank you very much! I also had a problem with a large file, they helped a lot.
Helped but only by dragging the file! Thanks a lot!
Good evening, thanks for the article! I struggled too until I found it. Please advise on this situation. I downloaded the cadastral passport, and on the second page, where the plan should be, it says: "There is no file with the floor plan." What to do?
Plans are not displayed on the Rosreestr website. Try this service, it is also free, but there is a plan.
Free legal advice:
I can not help but add another HUGE THANK YOU)))
I join Elena: “Thank you very much for the article! Useful and necessary information! I was very tormented in finding a program to open the file, but it turned out that the problem is solved differently) ”MANY THANKS, because. a lot of time was spent on unraveling, and the casket just opened. ROSREESTR website is a labyrinth of hell!
Thanks for the info, helped)
THANK YOU. VERY HELPED! Health, happiness and prosperity!
There is another option - open xml in IE, press F12, document mode - IE7.
Free legal advice:
and it opens as it was intended… innovation and development, friends…
Tell me, IE7 (document mode) is where and where to click? He also doesn’t read the building plan in the cadastral passport ... I don’t know what to do already
Thanks for the info, it's all open.
A big THANK YOU to you. And to my friend Tatyana, who found your article!)
Thanks for the help! I printed out the cadastral extract, but it is without a signature! Just text! The copy of the electronic signature that I received is not opened or printed. To submit documents for obtaining a GPZU (urban planning plan for a land plot), I need to provide a cadastral extract in paper form and on electronic media. Will they accept my document in such a printed form or do I need to order it again on paper with a signature and a seal?
thank you very much for the help.
Free legal advice:
Thanks a lot for the article! Useful and necessary information! I was very tormented in finding a program to open the file, but it turned out that the problem is solved differently)
Leave a Reply Cancel reply
Wise Thoughts
The perfect time will never come.
Site search Cadastral engineer
Desktop of a cadastral engineer
Examples of boundary, technical plans, etc.
Public cadastral map
Vkontakte website page
Cadastral engineer
Sites dedicated to the subject of cadastre
Open the xml file of the USRN statement from Rosreestr and get it in its normal form
The Rosreestr website has a special service for opening statements (link below). Using the example of an extract for an apartment, we have written detailed instructions, so repeat after us. Also, at the end of the article, they wrote a small additional instruction if the graphic plan is not displayed in the statement.
Free legal advice:
- Place all files from the extract archive in a separate folder so that all files are in one place. There is no need to rename files from the archive; what files were in the archive, so let them be. From the archive to a separate one, we transferred an extract for an apartment in .xml format, a unique digital signature in .sig format and a folder (1), which contained a graphic plan of the apartment on the floor. Usually the graphic plan is located inside the statement itself, but in our case it came with the statement separately (you can see it in the picture). After opening the file with the graphic plan, you can view it.
If the graphic plan is not displayed
Usually, the graphical plan of the property is displayed correctly in the electronic statement, but it happens that in the section with the plan the message “There is no file with the floor plan” may appear.
To display the plan, move the file with the .html format statement and the folder with the graphic plan to the previously created folder, i.e. it is important that the statement in .html format and the folder with the graphic plan are in the same place. Under no circumstances should a folder with a graphic plan be renamed. We came under the number 1, and remained so. You can see it on the picture.
If you have any questions, please consult a lawyer for free ↓ or in the comments below.
Ask your question in the form below or in the online consultant window at the bottom right of the screen. Or call the numbers (24/7): - Moscow and the region; - St. Petersburg and the region; dobvse regions of the Russian Federation.
Free legal advice:
Add a comment Cancel reply
Graphic plan does not open according to your instructions
Hello Dmitry. You can email me the original statement file. I can't help you without seeing the document itself.
Hello! I also do not have an EDS in the document, they sent it after the end of the registration of the purchase and sale transaction
Hello Maria. Explain your situation in more detail.
Thanks a lot for the graphic file tip!
there is no digital signature in the sent file - why? And the room file is missing - why?
Free legal advice:
Hello Ludmila. Where did you order the extract?
the downloaded file opens in worde as an icon set
Hello Valery. The file with the html extension should not be opened by Word, it is only opened by browsers. Right click on the html file and select "Open With" then your browser shortcut.
Doesn't open at all
Then send me the original statement file by mail. Check your mail, I wrote the same thing to you there. I can't help you without seeing the file itself.
Free legal advice:
- Admin on We open the xml file of the USRN statement from Rosreestr and get it in its normal form
- Admin on We will help you figure out the deduction of tax for an apartment bought by spouses
- Admin on We figure out when it is necessary to certify the contract of sale of an apartment with a notary
- Admin on Making a donation of a share in an apartment in 2018
For a free legal consultation
- Moscow and region St. Petersburg and region ext 346 all regions of the Russian Federation
How do you open documents from Rosreestr
Dear friends, today we will try to view the Rosreestr XML file in its normal form for further work with it. To perform the operations from the next block, you will need access to the Internet, as we will use online services. Therefore, take care of this issue in advance. To begin with, we will briefly talk about what files are, perhaps with an extension unknown to you.
- An XML document is a structured database that includes some information that is then available to the user.
- A file with the SIG extension is a digital signature document to authenticate the previous one. Therefore, we cannot work without it.
But what will the following instruction give us? After all, XML can be opened in a simple notepad and quite easily find the necessary information there. But what if you need to open an extract from Rosreestr XML and print it out? Then you will need the following way to launch documents from the federal service. Otherwise, you will just be left alone with a bunch of codes and databases. But don't be afraid, it's not so scary: the following steps are very easy, so you will achieve your goal in just a few clicks.
XML and SIG: how to open Rosreestr?
- Now we will try to read the Rosreestr XML file in a normal format. To begin with, you should make sure that you own two documents: the XML file itself and its SIG digital signature. Without the latter, you will not be able to see the information you need. Only after making sure that these two files are safe and sound, we proceed to the next step.
- Now we go to the Rosreestr website at the link https://rosreestr.ru/wps/portal/cc_vizualisation to the page for checking the electronic document.
- In this window, you will see two fields for inserting documents, one for the XML file and the other for the digital signature. Drag and drop files from your computer with the left mouse button to the appropriate fields or use the "Select file" button opposite each item.
Inserting documents in Rosreestr
Free legal advice:
- We remind you that you will not be able to use the service of the federal service website without an active Internet connection.
- It is recommended to use Internet Explorer or Safari as a browser. Of course, other browsers will also allow you to perform these operations, but you will need to set some parameters. More about them for each program will be discussed below.
- Google Chrome must be set to "Load insecure script" otherwise nothing will work.
- Open the Browser Menu (three horizontal bars in the upper right corner) → Settings → Show advanced settings → Personal data → Content settings or enter chrome://settings/content into the address bar of the browser and press Enter. In the Java Script section, select Allow all sites to use JavaScript (recommended) or set exceptions.
Allow all sites to use JavaScript
Conclusion
Friends, now you know how to open and read the Rosreestr XML document. Summarizing the above, the following can be noted:
- You will need an active internet connection to work.
- The recommended browser for browsing pages is Internet Explorer on Windows and Safari on MacOS.
- Make sure you are familiar with the two types of data - a digital signature with a SIG extension and an XML document.
- After checking the files, you can not only view and save them, but also print them.
We hope that everything worked out, and there are no questions left. Of course, do not forget to share your opinion, impression, personal experience in the comments!
We spend most of our time at the computer on the Internet. Music, movies, books, communication -
Sometimes your favorite computer starts to give out "miracles". Well, if at this moment there are no important
Free legal advice:
Users actively store information on the PC, ignoring warnings that
- Internet Explorer version 9 or 10, which has compatibility registers (it is allowed to use the service and the eleventh version). You must use the option -Include all content. At the same time, at the time of opening the file, a panel with a button will appear at the very bottom of the window, or you can use the settings to activate the Rosreestr website in order to view it in compatibility mode.
- Mozilla Firefox (Mozilla Firefox) using the setting - disable protection on the page. The designation is formed in the form of a shield located in the left corner of the window of the file being opened, more extended information can be studied online on the sites;
- Google Chrome (Google Chrome). When configuring - loading an unsafe script, an emblem in the form of a shield pops up in the upper part of the right corner of the window when opening a file. For more information, please refer to the website;
- Safari (Safary), used when not using the auxiliary view security setting;
- Opera (Opera) without the presence of auxiliary options that are responsible for security. In addition, it is possible to see information (except for graphical diagrams) when this xml file is opened.
Many thanks! It is a pity for the lost time and nerves because the Rosreestr employee could not tell me in a human way how to get data in human form.
Thank you so much! "Human-readable format" made life very easy)
How to open the sig file of the registry?
A sig file is a document that contains an electronic digital signature to confirm its authenticity. It is attached to the end of an email or file. Consider what and how to open the sig file.
In general, there are two methods for viewing documents with a digital signature - this is to view it on a computer using a special application or open it using an online cloud service.
How to open sig extension?
To view files with digital signatures, you can use a regular notepad, an email client (for example, Microsoft Outlook), or a digital signature program like CryptoARM.
It is also possible to convert a digitally signed file to PDF format, for example, using the PDF24 Creator utility, for easier viewing.
How to open a .sig file?
Consider the easiest way to open - through notepad:
After that, you can start working with the opened file.
How to open sig extension online?
To determine the authenticity of a digital signature, you can go to the registry website. In the "Services" section, we find the "Verification of an electronic document" function, upload the necessary document and immediately receive an answer about its authenticity.
If you have any questions, leave them in the comments!
How to open cdw extension?
How to open vob extension?
Check also
How to open a 7z file?
For the convenience of storing files, compressing their volume, experienced computer users often use archiver programs. Rookies…
How to open a file with the sig extension on the Rosreestr website
Many people use useful information online on the Rosreestrakh website, get information from the cadastre. But since 07/01/2013, this information has ceased to be provided in pdf format. In connection with changes in the legislation of the country, a new version of the automated information system of the state real estate cadastre was launched. And in this system there is no possibility of attaching documents in pdf format.
At the moment, documents from the cadastre are submitted in the *xml extension. sig, which are signed electronically by a cadastral clerk. Normal computer programs do not open such files; certain special programs are required.
What is the sig format?
but each case is unique. If you want to know
how to solve exactly your problem - call by phone:
or if it's more convenient for you, use the online consultant form!
All legal advice is free.
A document with the SIG extension contains an electronic digital signature, often used when transferring documents via online mail. Documents with such extensions are widely used by computer users around the globe.
Typically, a SIG document is a small text document that is attached by the sender to the end of an email. The content of the letter is determined only on an individual basis.
The file with the sig extension includes the name of the sender, the name of the e-mail. In addition, you can add other necessary information, such as the name of the organization, phone numbers, the position of the sender and other important information for making contacts.
Modern computer programs for sending e-mail, for the most part, can create and read an electronic signature. When an email is created, a file with the SIG extension is attached to it.
How to open SIG on the Rosreestr website
The required file is loaded into the service window that opens and the “open in human-readable format” button is pressed.
On the Rosreestr website, you can find detailed instructions that help you open files with *xml and *xml.sig extensions.
In order to check the document directly, using the help of the registry website, it is advisable to use the following widely used Internet browsers:
How to open SIG on a computer
Users need to know what kind of computer program can open files with the sig extension. Most often, the following programs are used to open these documents:
The easiest way to open it is to use the familiar Windows tools without resorting to downloading additional programs.
In order to open a file in notepad, you need to click directly on the file with the right mouse button, then “open with” will pop up and a list of suggested programs will appear, select notepad from the list and click “open”.
In order to edit an electronic signature and send a message with a modified signature, it is recommended to use Microsoft Outlook. But unlike notepad, this program is paid and requires registration.
Atom is similar to notepad but has been enhanced with syntax highlighting.
Now users are familiar with how to open a sig file on a computer, using which programs.
XML is an extensible form of Markup Language. A file with this extension can store databases, application settings, software bundle data, and other information. Such documents are widely used among users, so the question of how to open XML arises quite often.
Using text editors
Inside the XML document is textual information, so no paid software is required to view it in a readable form. You can use a browser, any text editor built into Windows or from third-party developers, or special programs for working with the XML format.
Windows Notepad and its analogues
As part of Windows, initially there is a program that can work with any text - Notepad. You can find it in the list of standard applications in the Start menu. Together with it, another text editor is preinstalled - WordPad. It can also be used to view XML documents.
If you right-click on the XML file, then immediately below the "Open" item there will be a line "Edit". When you click on it, the contents of the document will be displayed in Notepad. If you can't open the file this way, or you want to use WordPad to view it, open the "Open with" menu. 
You can also use third-party notepads to read and edit XML documents, such as NotePad++. It implements syntax highlighting, which may seem convenient when editing a file.
Microsoft Office suite
Instead of Notepad, WordPad and other similar programs, you can use applications from the Microsoft Office package - Word and Excel.
- Start Word.
- Specify the path to the XML document.
The disadvantage of Word is that it is difficult to edit XML in it. Therefore, if you want to change some data, it is better to use Excel.
- Launch Excel.
- Expand the main menu, click "Open".
- Select an XML document.
- Specify to open it as an XML table.
If instead of the Microsoft Office application package, the OpenOffice application library is installed on the computer, then it's okay: you can open XML through OpenOffice Calc, an analogue of Excel.
XML editors
If you need to not only see the contents of the tables, but also edit them, then it is recommended to use special software designed to work with the XML format. You can use the following editors:
- XML Editor by Oxygen
- XML Marker
- xsemmel
- EditiX Lite Version
The programs differ in their capabilities: some have an XSLT transformation function for transforming XML documents, hints in the form of highlighted code sections; others offer only viewing and minimal editing. 
The choice depends on the needs and skills of the user, since the software is specialized. However, you can download the listed programs for free.
Browser View
If there is not a single text editor on your computer, or XML does not open in a readable form, you can use a browser or view the contents of the file online.
Browsers
All modern browsers support reading the XML format. However, you need to understand that since the document does not contain information on how to display data, web browsers show them "as is". To use a browser to open (using Chrome as an example):
Similarly, the launch is performed through other browsers. A new tab will open in the browser displaying the contents of the XML document. 
In Mozilla Forefox, you can open a file in another way:
If the file is corrupted, the browser may display an error message when trying to open the document. In this case, it is recommended to use one of the XML editors mentioned above.